2018.3V Super Version ICOM A2+B+C For BMW Diagnostic & Programming Tool With ISTA-D 4.09.13 ISTA-P 3.63.2.001
9000 remaining days
BMW ETK: 2018.03
BMW KSD: 03.2018 Multilanguage
BMW FSC Navigation Code Generator
BMWAiCoder for BMW Coding
With free BMW Engineer Software (INPA, NCS, WinKFP, E-Sys 4.09.13 e-sysplus 4.09.13, tool32 61.5, BMW FSC code generator, newly added Dr.gini B020 diagnostic software, BMW AiCoder.
Dr.gini B020 diagnostic software requires Ediabas properly installed and functional with a communication interface ( ICOM, ICOM Next, ENET, PASSTHRU or K+DCAN ),
the BMW manufactured before 2003 are not supported.
Multi-language available in diagnosing, programming and TIS diagram circuit:
English, German, Spanish, Russian, Simplified Chinese
Dual-core processor, better above I3; over 4G of memory
It is recommended to use Lenovo ThinkPad: T61, T400, T410, T420, T430, X61, X200, X201, X220 X230 and other laptop with Intel chipset, such as I3 I5 / I7 series.
BMW ICOM Connection Guide:
1. No time limitation for use. Once insert hard disk into your computer can automatically install.
2. Fast running speed. This version BMW ICOM A2, software running speed increase 30%.
3. Fully-new Serial Numbers (S/N), work stably.
4. Powerful engineer software: Reflash the hidden function of all BMW AG models, separately program each module, program and decode for the old parts that need to replace, change Human Machine Interaction (HMI) language (Note: The operator need to be very well qualified-like BMW engineer)
Super Version BMW ICOM A2+B+C Function:
A2- OBD diagnostic supporting MOST, D-CAN and K-CAN protocols
B - diagnostic via MOST bus, and have connection to A-interface via USB connection.
1pc x BMW ICOM A2 Interface
1pc x BMW ICOM B Most
1pc x BMW 20pin Cable
1pc x USB Cable
1pc x OBD2 Cable
1pc x LAN Cable
1pc x BMW ICOM HDD
Live Support: Chat with us online
If you have any problem, please do not hesitate to contact us.
If your package shipped by Express Delivery, please give us a valid delivery phone number, and also a full and accurate shipping address.
Super Version BMW ICOM A2 (SP168-BO) Firmware Update Steps and Note
1. Use Network cable to connect Super version BMW ICOM A2 (item NO. SP168-BO) with computer, charge Super version BMW ICOM A2 with 12V power adapter or connect Super version ICOM A2 with the BMW vehicle.
2. Open IE Internet Exploer, browse http://169.254.33.45:60080/, log in with username/password: root/NZY1150263
3. Click "Update Firmware", you will see ICOM firmware version information.
4. Choose file "ICOM-BootImage-01-13-00.bin", set image type to SYSTEM, click "Send the file".
5. When it pops up "Write the image file to the flash?", click "Yes", then ICOM indicator light will turn red.
6. When it pops up "The SYSTEM IMAGE update was successfull", click "Update Firmware".
7. Choose "ICOM-ApplicationImage-01-18-00.bin", set image type to APPLICATION, click "Send the file", it will spend several minutes since the file is a little bit large.
8. When it pops up "Write the image file to the flash?", click "Yes", then the ICOM indicator light will turn red for the second times.
9. When it finish upgrading, click "reboot".
1. Setting up your computer to obtain an IP address automatically
2. Firstly choose the smaller file "ICOM-BootImage-01-13-00.bin" , then set image type to SYSTEM;
Secondly choose the bigger file "ICOM-ApplicationImage-01-18-00.bin", then set image type to APPLICATION.